It’s no secret that capacity gets tighter and freight rates higher for all shippers during produce season. While the increased freight demand during produce season affects all markets, produce shippers and those with other temperature-controlled products are hit the hardest. Yet, produce shippers that make use of these suggested tips have a better chance of finding capacity and keeping their costs manageable. 

Shipping temperature-sensitive items? Check out our Temperature Shipping Guide for temperature suggestions.

TABLE OF CONTENTS

• When is produce season?
• Tips for produce shippers during produce season
  • Make your produce easy to work with
  • Have your produce truck ready
  • Make sure your carriers are vetted
  • Find providers that run temp-controlled year-round
  • Make use of technology
  • Be the produce shipper all the carriers want to work with
  • Look into multimodal solutions
  • Measure carrier performance
  • Consider a 3PL
• It’s not too late!

When is Produce Season?

Produce season is impactful because it puts pressure on freight shipping rates, which affects shippers both inside and outside the produce sector. To simplify, it’s the rise in crop volumes and heightened demand for trucks to transport these crops that impact capacity during this season. These factors lead to an increase in rates, not only for the shippers who need trucks with temperature control but for a majority of shippers across other modes and regions as well. 

It’s vital for produce shippers and all others impacted by produce season to know exactly when the spike in shipping begins. Generally, produce season begins sometime around February and runs through early fall. The main regional areas shipping increased produce are Florida and the East Coast, Texas and surrounding states, and California. 

Texas Produce Season

The most impactful time is from March through June however, produce can be found year-round coming from over the border out of Mexico. In Arizona and New Mexico, there is a push for produce that usually occurs in October or November.

Florida Produce Season

Starting as early as March, southeastern states like Florida begin to see an uptick in produce shipping. As temperatures warm up, produce season creeps its way up the East Coast with northeastern states’ produce shippers slowing down sometime in early fall.

California Produce Season

Like the East Coast, produce season starts in the southern part of the state around March and creeps its way up to the northern region, ending in early fall. 

Tips for Produce Shippers During Produce Season

Produce shippers facing challenges with capacity during produce season isn’t new. But there are things produce shippers can do to make shipping during produce season easier. Here are some tips you should consider to make it through this tough season.

Make Your Produce Easy to Work With

When capacity is tight and rates are high, carriers get to pick and choose what load they want. Make your produce shipments more desirable by making the job easy to complete. 

One way to do this is through freight consolidation. Regional consolidation makes freight easier for carriers to work with. Simply put, instead of using a long-haul truck to make many pick-ups or deliveries in a regional area, hire a regional short-haul expert to do that part. They make all the pick-ups and deliver to one spot so that your long-haul carrier can make one easy pick-up and drive onward. Vice versa is that the long-haul carrier would drop off at one regional facility, and then you use the regional carrier to make the many deliveries. 

We’ve found that consolidating the freight this way increases the percentage of on-time delivery, increasing your product’s shelf life and customer satisfaction. 

Make Sure Your Produce is Truck Ready

This goes hand in hand with making your produce easy to work with. Often, produce vendors will work with many packing house facilities. Make sure you confirm with the produce shipper where the truck needs to pick up. It’s never a great start to a shipment when a driver has to search location after location for their pick-up. Not only does the driver get frustrated, but with it being a time-sensitive shipment, you want to make sure there are no hang-ups, so it’s picked up on time, delivered on time, and your product’s shelf life is as long as possible.

Make Sure Your Carriers are Vetted

This may be your most important piece of advice. Make sure your selected carriers are properly vetted. 

What exactly do we mean by that? This means making sure they have reefer breakdown coverage. Or making sure they have the right amount of insurance coverage in case something goes wrong. 

For example, cherries are hard to come by and based on market conditions, their value can change. Does your carrier have that coverage should there be a problem? 

There’s also FSMA compliance to consider now. Does your carrier know how to work with produce shipments? Do they have that experience? Do they carry pulp thermometers in their trucks and understand that process to ensure they are not loading produce that is too hot or too cold, making sure it will be in good shape when it’s delivered? All these factors are something to keep in mind regardless of market conditions. 

When selecting and vetting your carriers, remember there is a big difference between the cheapest truck and the RIGHT truck. 

Find Providers that Run Temp-Controlled Year-Round

Finding and building a relationship with providers that execute year-round temperature-controlled freight across the country can give produce shippers a competitive advantage. By having that relationship, you’ll know and better trust your provider because they have the proven experience and understanding of working with your perishable freight. Additionally, having that reliable relationship can help you keep your costs down during peak produce season.

Make Use of Technology

Making use of transportation management (TMS) technology can help during this season. A TMS can help you with routing decisions by matching freight with the best carriers, lanes, rates, and transit service. In addition, it will allow you to optimize the in-house processes of your transportation network – which can help in both times of disruption and easier times. By selecting the best carriers and optimizing your routes, you’ll not only increase your service levels but reduce your risk. 

Having a best-in-class TMS also provides you with data-driven insight to better manage disruptions, reduce downtime, and effectively plan and budget your logistics spend. By using data analytics, you’ll be able to recognize which carriers are most likely to have the capacity, allowing you to reduce your harvesting to minimal levels. 

Having a TMS on hand gives you a full view of your network and transportation management. You’ll be able to see what’s happening across all markets, ensure proper rates for shipments, find freight consolidation options, and track everything from start to finish. You’ll be better prepared for now and any future disruptions. Not to mention, you’ll also gain an extra layer of security to your supply chain, which is something top of mind for everyone in this industry.

Be the Produce Shipper All the Carriers Want to Work With

There is never a time when you shouldn’t strive to be a shipper of choice. Carriers are in the position of choosing which shippers they want to work with. Produce shippers who provide better experiences for carriers can reap long-term benefits in the form of higher service levels, fewer claims, and better rates. 

To become a shipper that carriers want to work with, it’s important to run efficient and friendly dock operations, reduce driver wait times, provide comfortable breakroom and restroom accommodations, and pay carriers quickly. Let’s break these down further.

Have a Fair Accessorial Schedule

Make sure it is in line with industry standards. You can also leverage your relationships with other carriers, shippers, and 3pls to see how you compare.

Pay Quickly

In business, cash is king, especially for carriers. Favorable payment terms can make a world of a difference to a smaller carrier company or an owner-operator. Anything under 30 days is often ideal.

Tender with Ample Lead Time

This may not always be possible, but the sooner you get a load tender to your selected carrier, the better they can plan their own workload. Providing as much lead time as possible can help you get the best capacity available at the most cost-effective rates. It can also get you more committed freight and keep you out of the spot market. 48 hours or more is ideal. 

Simplify Your Appointment Scheduling Process

Put yourself in your provider’s shoes. What is it like to get an appointment set? Is it a huge effort or is it quick and easy? The easier and more user-friendly the process is, the more carriers will want to work with you.

Have Realistic Transit Times

Whenever possible, schedule pick-ups and deliveries that set carriers up for success. If transit is too tight and a late driver will have to wait hours for the facility to work them in, then the load is less attractive. Whereas if the pick-up and delivery are too far apart and a driver will have to sit around to get unloaded, then the load is also less attractive. Make sure your transit times are reasonable and make sense to keep carriers moving along. They will appreciate it. 

Turn Drivers as Quickly as Possible

The industry standard is two hours or less. Anything over that and your facility is at risk of having a negative reputation among drivers. Depending on your freight and operations, this may not be possible, but it is something important to keep in mind. 

Provide Basic Amenities for Drivers

Access to bathrooms, vending machines, waiting rooms, Wi-Fi, and most importantly, a friendly smile at the dock will go a LONG way.

Look Into Multimodal Solutions

When truckload capacity is tight, using a variety of modes can help mitigate capacity challenges while reducing your cost. Exploring multimodal options can be a great way to diversify risk, add capacity, and protect your freight budget. It can also give you the opportunity to reduce your company’s carbon footprint. 

Measure Carrier Performance

Whether you awarded hundreds of lanes in an RFP event or are a small shipper relying on the spot market, it’s important to have your supply chain driven by data, and tracking carrier performance is a part of that. If you can’t track it, how else can you make improvements?

Be sure to communicate your KPIs to every carrier you work with so they can be crystal clear on your expectations. Regularly evaluate your carrier base. Give them report cards and make sure their performance is not a mystery to you or them. You should also have a process in place for taking action for poor performance when needed. Again, clearly communicate that process to your providers, and be sure to stick with it. Inflationary markets will often show you which providers are serious about being your business partner. 

Consider Working With a 3PL

To gain quick access to capacity, produce shippers should work with a quality third-party logistics company (3PL). 3PLs work by having quality carrier relationships often in a network way larger than you can manage alone. Additionally, working with them gets you access to TMS technology and an expert to help you throughout times of disruption. It allows you easy access to multimodal solutions so you can easily compare rates across modes. Quality 3pls will include proper carrier vetting, so you know you’re working with a qualified carrier. Additionally, 3pls keep tabs on the industry and are well known for their skills in navigating disruptions with ease. 

IT’S NOT TOO LATE!

If you found some tips that could better help you, it’s not too late to act. Any improvements that you make now will help you ship better. The faster you act, the more likely you will beat your competition to the punch. Now all this might seem like an overwhelming amount to do, which is why we’d like to offer you our help.

Trinity has over 40 years of experience working through produce season and years of supply chain disruptions. We can help you with capacity through our network of strong carrier relationships available. We can also help you in your journey of being a shipper of choice as we offer carriers Quick Pay options through TriumphPay, available within two days.

Interested in freight consolidation or multimodal options? Our Team of Experts are here to help. We also have best-in-class TMS technology available with customized solutions to fit your needs, not the other way around, and experts to support you in those applications. Most importantly, we offer you a People-Centric approach throughout every step of the process.  

No matter what you need to get through produce season, Trinity Logistics is capable and ready to support your business.

What do semiconductors, plastics, furniture, chlorine, and more all have in common lately? They are near impossible to find. As disruption after disruption has interrupted supply chains, shortages are now messing with shipping and demand. Specifically, raw material and product shortages are affecting the chemical industry. With many other industries relying on the chemical industry, this is becoming a significant challenge to overcome.

MATERIAL AND PRODUCT SHORTAGES

Shortages in the chemical industry have worsened over the last quarter. According to a June survey of 84 National Association of Chemical Distributors, nearly 85 percent of distributors report at least one imported item as out-of-stock. This is a huge jump compared to only 47 percent found in March. Inventories in the chemical industry have begun increasing, but they have yet to reach their pre-pandemic levels. These shortages are not only hurting the chemical industries but the many industries that rely on them. One example is the shortage of citric acid, as it’s often used in vitamin or electrolyte drinks, even in soda. These material shortages mean tight supplies, high prices, and continued delivery delays.

Some recent materials and products that currently face shortages in relation to the chemical sector:

Semiconductors

Many manufacturers worldwide are having trouble securing supplies of semiconductors, delaying the production and delivery of goods, and increasing prices. Several factors are driving the crunch, which first affected the auto industry. The shortage is going from bad to worse, spreading from cars to consumer electronics. With the bulk of chip production concentrated in a handful of suppliers, analysts warn that the crunch is likely to last through the rest of 2021. Materials most vulnerable in semiconductor production include wet chemicals, solvents, photoresists, gases, and substrates. Several semiconductor process materials in the petroleum supply chain are also running short. Those materials include acetone, PGMEA, NMP, and IPA, and a few of several solvents.

Plastics

Yet another shortage complicating business is plastics. Food packaging, automotive components, clothing, medical and lab equipment, and countless other items rely on them. Since March 2020, a perfect storm of events has been putting severe strains on the supply of plastic raw materials, base plastics, and compounded plastics. This shortage has hit plastic product manufacturers very hard. 

The demand for plastics continues to surge, especially for food packaging and automobile components plastics production. Plastics required by high purity chemical providers for packaging and wet processing equipment are experiencing raw material price increases due to availability issues.

Plastics make every kind of product imaginable — from food packaging, appliances, smartphones, and car parts to exercise equipment and roller skates. So with the ongoing surging demand for goods, it’s easy to see why these shortages are a big deal.

Chlorine

The swimming pool boom from the pandemic created a higher chlorine demand, thus contributing to a shortage. There was also a manufacturing lab fire in August of 2020 in Louisiana that only further aided the shortage. 

Some pool supply stores have imposed quantity restrictions. In certain regions, prices for chlorine tablets have doubled from last year. The chlorine shortage is widespread, and it will likely worsen as homeowners use their swimming pools for the season. 

Gas, Oil, Fuel

It’s not quite that there’s a huge shortage of crude oil or gasoline. Instead, it’s a shortage of tanker truck drivers who deliver it. According to the National Tank Truck Carriers, 20 to 25 percent of tank trucks in the fleet are parked due to the shortage of qualified drivers. The driver shortage has been an issue for a while, but the pandemic multiplied it. 

Gas prices, which typically rise at the start of the summer as seasonal regulations take effect — requiring the more expensive “summer blend” of gasoline needed to combat smog — are also rising. The national average has surpassed $3 a gallon this summer and could get even higher if any hurricanes hit the Gulf Coast or if there are any other disruptions to supply, such as a refinery fire. 

Other Raw Materials

As countries work to switch over to green energy, the demand for copper, lithium, nickel, cobalt, and other rare earth elements is soaring. And these raw materials are vulnerable to price volatility and shortages as limited access to known mineral deposits is another risk factor. Only three countries together control more than 75 percent of the global output of lithium, cobalt, and rare earth elements – the Democratic Republic of Congo, China, and Australia. Constraints on the supplies of their raw materials — especially polyethylene (PE), polypropylene (PP), and monoethylene (MEG) — are leading to factory shutdowns, sharp price increases, and production delays.

SHORTER SUPPLY + HIGHER DEMAND = HIGHER COSTS

Consumer spending rapidly grew because of the pandemic. Remote working and schooling created an increased demand for electronics. Higher demand came for food packaging and healthcare markets. Automotive production rebounded and surged beginning in the third quarter of 2020. All these and more are impacting the chemical industry.

These disruptions have undoubtedly led to rising prices. Echemi reported in late March that more than 20 chemical companies including BASF, DuPont, Dow, DSM, and LANXESS, have raised prices. These price hikes are largely due to difficulty in getting raw materials used to make products. And there’s less supply than there was a couple of months ago. As demand is rising relative to production, prices have increased for chemicals, like polypropylene, acetone, and other solvents. 

…AND LOGISTICS DELAYS

Not only have shortages worsened since March, so have delays. NACD’s survey found that 82 percent of respondents are dealing with an average uptick in travel time for their shipment of 11 days or more. And these issues extend throughout the supply chain. 

Containers and boats to ship products from overseas are in short supply. Products could be sitting in a factory overseas for months because they can’t get loaded onto a ship. Then you have the ports struggling with delays. Currently, you can look at live video outside of Los Angeles and you’ll see up to 30 boats driving around waiting to get an appointment because there are so many ships coming in. Ships are waiting longer to get in and once they do get in, there is a shortage of drayage drivers that only adds to the congestion. 

A lack of truck drivers and warehouse workers has contributed to the delays as well. The driver shortage was an issue before COVID, but the recent labor shortage in warehouse workers has created a larger problem. Say you do have a truck available. But if you don’t have somebody in the warehouse to pull the goods out of the racks and load them on the truck, then that’s another issue causing delays.

Supply chain issues continue to hamper the whole of manufacturing. It’s hard to look at the global supply chain and not think, “everything that can go wrong has.” The impact of these issues continues to impact many industries downstream. On raw materials such as chemicals and plastics, inventories are unlikely to be rebuilt amid continuing strong demand. There’s simply not going to be a quick return of inventories. 

WHAT YOU CAN DO DURING THESE TOUGH TIMES

Begin building a more resilient supply chain

Consider moving manufacturing operations closer to home. This can help reduce your transportation times from future delays or disruptions. Make plans now to be prepared for all potential disruptions. Disruptions to the supply chain are not new, but this current phase of repeat instances has been rougher than most.

Gain access to technology

Integrating technology into your supply chain has now become a necessity. Implementing technology like a transportation management system (TMS) will help all stakeholders maintain real-time communication and visibility. A TMS can help you optimize your routes and work with the best carriers, increasing your service levels and reducing any delays. It can provide you with data-driven insight so you can better manage current and future disruptions. And by using data analytics, you can recognize which carriers most likely have available capacity, reducing your time spent on transportation coverage. Gain insight into what’s happening across all markets, ensure proper rates for shipments, and keep more control over your budget and logistics costs with TMS technology.

Work with experts that keep a pulse on the market

An expert can help you pick up on early warning signs and help you prepare for potential constraints. They can also offer you alternative solutions when needed. 

Here at Trinity, we are a Team of experts. We do more than arranging your freight. When working with Trinity, we become logistics partners in your business and aim to help you with your growth. We can help you streamline your logistics procedures and give you insight into the freight market. We keep a close eye on it and keep you educated to help you plan and forecast. 

We also work very hard to follow through on what we say we are going to do. When issues arise, we work until they are resolved, keeping communication every step of the way. We have over 40 years of experience in logistics and industry challenges in supply chains is our day-to-day.

Industry experts and forecasters are saying this tough market is far from over. It may even look to extend into 2022. So don’t hesitate in asking for help. We’re here and ready to provide you with our People-Centric approach for you during this historical time in logistics.

Author: Jennifer Braun

All industries are currently facing challenges with their logistics and the supply chain. Challenges that include overwhelming demand, tight capacity, rising freight rates, and shortages in materials, products, labor, and drivers. However, industries facing high flatbed demand, like construction and manufacturing, are seeing more difficulty than others. 

These industries have been dealing with capacity challenges throughout the pandemic as they have remained in high-demand. As it continues to rise, the needs for their supplies have increased, creating a surge of flatbed demand that’s weighing on the supply chain. Let’s take a deeper look into these challenges and present some considerations for how those in the industry can overcome them. 

FLATBED DEMAND VS. VAN AND REEFER

Finding truck capacity of any type is proving to be difficult. Flatbed capacity seems even more challenging because of the continued demand in construction and manufacturing. As a result, flatbed spot rates are reaching new highs and convincing more shippers to look for solutions. 

According to DAT, the flatbed load-to-truck ratio is up 169.3 percent year-over-year (YOY) from June 2020 to June 2021. In comparison, reefer’s load-to-truck ratio is up 111.7 percent YOY. Van load-to-truck ratio is up 57.8 percent YOY. 

The monthly national average flatbed spot rates have risen for eight consecutive months, reaching $3.15 per mile in June. There’s not looking to be any fall soon, as the industries pushing the flatbed demand are cranking it into the next gear. 

FACING DISRUPTION AFTER DISRUPTION

The return to normal may be farther away than you think. With demand, there are still projects waiting in the wings until materials can be properly sourced and shipped. And demand already has construction projects beyond their pre-pandemic heights. Just look at the Associated Builders and Contractors’ Confidence Index, which is now positive for sales, profit, and staffing level expectations for the next six months. 

Covid-19 Hit First..

When the pandemic hit, people had found they had nothing to do while staying home. And so, we saw a rapid uptick in those wanting to buy a new house or remodel. Demand quickly exceeded supply. Supply shortages and delays have put pressure on contractors as the demand rose despite a lack of supply.

..Then There was the Texas Freeze..

In February and March 2021, Texas saw their lowest temperatures in years and were not prepared for the intense weather conditions that they experienced. Many manufacturing plants in the area had to shut down, which created more disruption in the supply chain. 

..Then the Suez Canal Blockage..

The ship that blocked the Suez Canal for several days caused severe delays in the imports of many products needed. This created many shipping bottlenecks that we’re still experiencing the aftermath of today. 

..Now the Wildfires.

Currently, the raging wildfires on the west coast are causing further disruption and delays to an already stressed supply chain.

Issues such as these are causing supply chain disruption after disruption, resulting in increased costs and delays. Many companies rely on materials that come from delayed or now-unavailable, global manufacturers. This has shifted companies to search for regionally based suppliers, creating higher demand on smaller supply chains. After over a year of continuous supply chain disruptions, there’s been an industry-wide realization that building resilience into supply chains is vital. 

RISING FUEL PRICES

One of the areas affecting logistics cost are the continuing rise in the costs of fuel. The latest Energy Information Administration data shows the national average diesel price is at $3.34 per gallon, a $.05 increase from one month ago. Regional diesel prices range from $3.08 in the gulf coast states to $3.48 in the central Atlantic region. California diesel prices are averaging $4.19 per gallon.

SHORTAGES AND DELAYS

Lumber shortages continue to be a significant problem nationwide. Both steel and electrical supplies have faced steep price increases in the past year. According to the U.S. Census Bureau’s Small Business Pulse Survey, 59.7 percent of respondents reported domestic supplier delays which is a huge jump over the national average of 36.3 percent. These aren’t domestic only issues as 19.1 percent of respondents are also dealing with foreign supplier delays. 

MATERIALS THAT HAVE BEEN EXPERIENCING SHORTAGES

• Timber
• Steel
• Roof tiles
• Cement
• Electrical components
• Paints and sealants
• Plaster and plasterboard
• Concrete
• PIR insulation
• Bricks and blocks
• Aggregates
• PE and PP plastics
• Screws
• Plumbing items

THE RAW MATERIAL SHORTAGE

There is currently a global shortage of raw materials. This comes from factory slowdowns and, in some instances, factory closures due to many reasons. The shortage of raw materials continues to put a strain on the production of products, like insulation, paints and adhesives, and packaging.

THE LABOR & DRIVER SHORTAGE

Another cause of rising costs and delays is the shortage of labor and drivers. Labor rates have skyrocketed in recent months. This is due to the high labor demand and trades raising their rates because of the overwhelming amount of work. The big challenge these industries face is finding qualified labor to perform work, whether that be driving a truck to deliver materials and products, painting a house, or installing plumbing. In logistics, driving a flatbed truck, especially one hauling an oversized load, requires a different skill set than your typical van trailer trucking.

HIGH PRICES KEEP HEADING HIGHER

The Associated General Contractors of America (AGC) released a survey recently showing 93 percent of more than 1,400 respondents reported higher costs for materials, parts, and supplies. Construction material prices have increased so much in 2021 that the AGC issued a rare Construction Inflation Alert. This hasn’t taken since place 2008, citing a 12.8 percent jump of input costs for projects since the pandemic began. While that number is notable, some materials have risen even more. Lumber and plywood jumped 62 percent and steel recorded a 20 percent rise since April 2020. Diesel fuel, the lifeblood of the heavy equipment and transportation haulers needed to build major projects, has surged 114 percent. Even when materials are ready to be shipped, the transportation market is trying to play catch up. As mentioned earlier, there is currently more demand than there are trucks available. 

Rising costs and supply chain disruptions have pushed more hardships on the construction and manufacturing industries, slowing down their projects and business progress. Data found that more than three-fourths of construction firms have indicated projects are being postponed or canceled due to unavailable materials or cost overruns. 

POSSIBLE SOLUTIONS

Experts are estimating that the high demand in these industries and flatbed demand may continue through 2022. Not to mention, who knows what other possible disruptions we may see soon. Hurricane season is upon us and could cause some more delays. 

It’s never too late to find ways to improve your supply chain and keep costs budgeted. Here are some suggested solutions to facing this difficult time we’re in.

LOOK FOR ALTERNATIVE ITEMS

It might be worth checking into other materials to offer your customers. Many other companies are doing what they can to keep their projects moving forward and communicating this with their customers. For example, with rising lumber costs, you may find redwood or cedar to be more affordable alternatives. They may also be much easier to get your hands on. 

INTEGRATE TECHNOLOGY

Integrating technology has become a necessity for all stakeholders to maintain real-time communication and visibility. Gain total visibility and trust from your stakeholders with logistics technology like a transportation management system (TMS). A TMS can help you with routing decisions by matching your freight with the best carriers, lanes, rates, and transit service. 

Having a best-in-class TMS also provides you with data-driven insight to better manage disruptions and budget your logistics spend. By using data analytics, you’ll be able to recognize which carriers are most likely to have capacity and have a full view of your transportation management and what’s happening across all markets. 

CONSIDER NEW OPTIONS

When possible, see if you can use van options for your transportation, considering the load-to-truck ratio shows less demand and lower freight rates. You may also be able to consider other modes, if possible, but any oversized freight must be hauledwith a flatbed trailer. 

PLAN IN ADVANCE

Many other companies are stocking up on available supplies or finding other ways to look far ahead. Consider doing the same. Stock up on what materials you use most often for your projects. Do keep in mind that the more you stock up on, reduces the overall supply, increases demand, and thus pushes prices higher. Don’t go overboard and hoard ALL of it but do try to keep some stock in supply. Try planning your projects far enough out, correlating with the longer lead times we’re experiencing. If the material you need says it will take nine to ten months, then plan your project around that time frame.

BUILD A STRONG NETWORK OF CARRIER RELATIONSHIPS

Due to the over-demand of freight, load boards don’t move shipments the way they once did. Strong relationships will get you the coverage you need, better pricing options, and often better service. If building a large enough network for you seems daunting, you can always partner with a third-party logistics company (3PL), whose main role is their relationships among shippers and carriers. Here at Trinity Logistics, we have over 70,000 qualified carrier relationships to help haul your freight. 

BUILD A RESILIENT SUPPLY CHAIN

At a time when your costs are a critical issue, reimagining your supply chain could be a way to build resilience and reduce costly disruptions before they happen. Now is the perfect time for companies to build resilience into their operations to be better prepared for future disruption we may see.

Opportunities to do so range from reevaluating your business models and building efficient industrial supply chains, to building new and more regional manufacturing and distribution facilities to help with the vulnerabilities the pandemic brought to light. You could put in place more flexible sourcing and distribution strategies, including shifting your suppliers closer to home.

WORK WITH A QUALITY 3PL, LIKE TRINITY

We do more than arrange your freight. Consider us your logistics consultants. As logistics experts, we keep a close eye on the market, keeping you educated so we can help you plan and forecast. 

No matter the market, you can use your Trinity relationship and discuss your current and upcoming projects, even if they are in the planning stages. This helps us give you things to look out for to keep your transportation aspect of business more stable and reliable. When markets fluctuate, having a solid relationship with experts such as Trinity will prove to be your largest asset. 

Should issues arise, we at Trinity, work until they are resolved through and communicated. In the logistics industry, things will happen, and bad news doesn’t get better with time. We stay upfront with any challenges, and we bring solutions. When given the chance to prove our communication and service, we make sure to set the bar high. 

If you’re ready for a reliable provider to help you with your shipping needs and logistics management through People-Centric Freight Solutions®, then request your first quote to get started.

Author: Paul Nelson